No products in the cart.
IoT Course : https://github.com/Nabilphysics/ESP32_IoT_long_course_crux/wiki
Feature:
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.2V max input)
a Micro USB connection
Compatible with Arduino
Compatible with nodemcu
Lots of shields
Package included:
1 x Wemos D1 mini V2.2.0
2 x Long female pin
2 x Short female pin
2 x Normal pin
Based on 0 reviews
Be the first to review “WeMos D1 Mini ESP8266 V2.2.0 Dev Board”
No more offers for this product!
General Inquiries
There are no inquiries yet.
Related products
- Arduino, Boards
Arduino UNO R3 (WAVGAT)
Model: WAVGAD UNO R3
Brand Name: WAVGAT
Condition: New
Microcontroller: ATmega328
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHzSKU: n/a - Arduino, Boards, Bluetooth, Wi-Fi
ESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Arduino, Boards, Bluetooth, Wi-FiESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Features of the ESP32 include the following:
For Course : https://github.com/Nabilphysics/ESP32_IoT_long_course_crux/wiki
Processors:
CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS
Ultra low power (ULP) co-processor
Memory: 520 KiB SRAM
Wireless connectivity:
Wi-Fi: 802.11 b/g/n
Bluetooth: v4.2 BR/EDR and BLE
Peripheral interfaces:
12-bit SAR ADC up to 18 channels
2 × 8-bit DACs
10 × touch sensors (capacitive sensing GPIOs)
4 × SPI
2 × I²S interfaces
2 × I²C interfaces
3 × UART
SD/SDIO/CE-ATA/MMC/eMMC host controller
SDIO/SPI slave controller
Ethernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support
CAN bus 2.0
Infrared remote controller (TX/RX, up to 8 channels)
Motor PWM
LED PWM (up to 16 channels)
Hall effect sensor
Ultra low power analog pre-amplifier
Security:
IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)
Power management:
Internal low-dropout regulator
Individual power domain for RTC
5uA deep sleep current
Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interruptSKU: n/a - Arduino, Boards
Arduino Pro Mini
Model: Arduino Pro Mini
Brand Name: WAVGAT
Features:
Microcontroller: ATmega168
Operating Voltage: 3.3V or 5V
Input Voltage: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 16 KB (of which 2 KB used by bootloader)
SRAM: 1 KB
EEPROM: 512 bytes
Clock Speed: 8 MHz (3.3V model) or 16 MHz (5V model)SKU: n/a - Arduino, Shields
Gamepads JoyStick Keypad Shield PS2 for Arduino
Model: Gamepads JoyStick Keypad
Brand Name: HWA YEH
Condition: New
Features:
For all version of arduin Main board, 2009 , UNO, mega 1280, mega 2560
comes with example code
direct plug puzzle board, NO soldering needed.
Five momentary push buttons (4+ joystick select button, just like the playstation 3 analog stick push button)
two-axis thumb joystick
The push buttons are connected to Arduin digital pins 2-6; the related pin will be low when a certain button is pressed. Joystick
Y-Axis movement will produce a proportional analog voltage on analog pin 0, while, Joystick X-Axis movement will produce a analog signal on analog pin 1.Add nRF24L01 RF interface
With Nokia 5110 LCD interface, so very easy to game development.
Adding a Bluetooth module interface, convenient Bluetooth wireless serial communication.
Add I2C communication interface, easy connectivity to I2C devices
Meanwhile, JoyStick Shield with a cross PS2 joystick with buttons, there are four round buttons, 2 small buttons. Provides for Arduin joystick and buttons input expansion. Onboard switches can switch between 3.3V and 5V, can use this model for other 3.3V microcontroller platforms, such as STM32.SKU: n/a
There are no reviews yet.