No products in the cart.
Bluetooth, Driver
L298P PWM Speed Controller Dual High-Power H-bridge Driver ,Bluetooth Interface
Availability:
12 in stock
Technical Specifications:
1) logical part ofthe input voltageVD: 5V
2) VIN Input 6.5 ~ 12V, PWR IN 4.8 ~ 35V input
3) logical part of the work current: <36mA
4) operating current: <2A
5) maximum power dissipation: 25W (T = 75Celsius)
6) control signal input level: High 2.3V low-0.3V
7) Working temperature: -25 + 130Celsiusl
8) Drive Type: Dual power H-bridge driver
9) Pin occupancy: D4 ~ D7 direct drive motor
13Size: 68 * 53mm
৳ 485.00
12 in stock
L298P Shield DC motor driver using L298P,can directly drive tw oDC motors,drive current up to 2A,motor output using eight-speed Schottky diodes as protection.Stack design can be directly plugged into the,easier to use!
Technical Specifications:
1) logical part ofthe input voltageVD: 5V
2) VIN Input 6.5 ~ 12V, PWR IN 4.8 ~ 35V input
3) logical part of the work current: <36mA
4) operating current: <2A
5) maximum power dissipation: 25W (T = 75Celsius)
6) control signal input level: High 2.3V low-0.3V
7) Working temperature: -25 + 130Celsiusl
8) Drive Type: Dual power H-bridge driver
9) Pin occupancy: D4 ~ D7 direct drive motor
13Size: 68 * 53mm
Based on 0 reviews
Be the first to review “L298P PWM Speed Controller Dual High-Power H-bridge Driver ,Bluetooth Interface”
No more offers for this product!
General Inquiries
There are no inquiries yet.
Related products
- Bluetooth, Wi-Fi, Wireless Communication
ESP32 OLED WiFi Modules+ Bluetooth Dual ESP-32
Features:
high performance – price – ratio
small volume, easy embedded to other products
strong function, with the support of lwip protocol, freertos
support three modes: ap, sta and ap + sta
support for lua program, easy to developSKU: n/a - Arduino, Boards, Bluetooth, Wi-Fi
ESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Arduino, Boards, Bluetooth, Wi-FiESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Features of the ESP32 include the following:
For Course : https://github.com/Nabilphysics/ESP32_IoT_long_course_crux/wiki
Processors:
CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS
Ultra low power (ULP) co-processor
Memory: 520 KiB SRAM
Wireless connectivity:
Wi-Fi: 802.11 b/g/n
Bluetooth: v4.2 BR/EDR and BLE
Peripheral interfaces:
12-bit SAR ADC up to 18 channels
2 × 8-bit DACs
10 × touch sensors (capacitive sensing GPIOs)
4 × SPI
2 × I²S interfaces
2 × I²C interfaces
3 × UART
SD/SDIO/CE-ATA/MMC/eMMC host controller
SDIO/SPI slave controller
Ethernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support
CAN bus 2.0
Infrared remote controller (TX/RX, up to 8 channels)
Motor PWM
LED PWM (up to 16 channels)
Hall effect sensor
Ultra low power analog pre-amplifier
Security:
IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)
Power management:
Internal low-dropout regulator
Individual power domain for RTC
5uA deep sleep current
Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interruptSKU: n/a - Bluetooth, Uncategorized, Wireless Communication
HC-05 Bluetooth Module
HC-05 Specification:
Bluetooth protocal: Bluetooth Specification v2.0+EDR
Frequency: 2.4GHz
ISM band Modulation: GFSK(Gaussian Frequency Shift Keying)
Emission power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps,
Synchronous: 1Mbps/1Mbps
Security: Authentication and encryption
Profiles: Bluetooth serial port
Power supply: +3.3-5 VDC 50mA
Working temperature: -20 ~ +75Centigrade
SKU: n/a
There are no reviews yet.