HC-SR501 HCSR501 SR501 PIR Sensor


Specification:
◦ Voltage: 5V – 20V
◦ Power Consumption: 65mA
◦ TTL output: 3.3V, 0V
◦ Delay time: Adjustable (.3->5min)
◦ Lock time: 0.2 sec
◦ Trigger methods: L – disable repeat trigger, H enable repeat trigger
◦ Sensing range: less than 120 degree, within 7 meters
◦ Temperature: – 15 ~ +70
◦ Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm

৳ 120.00

  Ask a Question

হিউম্যান মোশন সেন্সিটিভ লড কন্ট্রোল, চোর ধরা সহ বিভিন্ন প্রযেক্ট যেখানে মানুষের মুভমেন্ট এর উপর নির্ভর করে আউটপুট ডিজাইন করতে হয় সেসব ক্ষেত্রে এই সেন্সরটি ব্যবহার করা হয়ে থাকে।

Model: HC-SR501 HCSR501 SR501 PIR Sensor
Brand Name: HAILANGNIAO

Features:
◦ Automatic induction: to enter the sensing range of the output is high, the person leaves the sensing range of the automatic delay off high, output low.
◦ Photosensitive control (optional, not factory-set) can be set photosensitive control, day or light intensity without induction.
◦ Temperature compensation (optional, factory reset): In the summer when the ambient temperature rises to 30 ° C to 32 ° C, the detection distance is slightly shorter, temperature compensation can be used for performance compensation.
◦ Triggered in two ways: (jumper selectable)
◦ non-repeatable trigger: the sensor output high, the delay time is over, the output is automatically changed from high level to low level;
◦ repeatable trigger: the sensor output high, the delay period, if there is human activity in its sensing range, the output will always remain high until the people left after the delay will be high level goes low (sensor module detects a time delay period will be automatically extended every human activity, and the starting point for the delay time to the last event of the time).
◦ With induction blocking time (the default setting: 2.5s blocked time): sensor module after each sensor output (high into low), followed by a blockade set period of time, during this time period sensor does not accept any sensor signal. This feature can be achieved sensor output time “and” blocking time “interval between the work can be applied to interval detection products; This function can inhibit a variety of interference in the process of load switching. (This time can be set at zero seconds – a few tens of seconds).
◦ Wide operating voltage range: default voltage DC4.5V-20V.
◦ Micropower consumption: static current <50 microamps, particularly suitable for battery-powered automatic control products.
◦ Output high signal: easy to achieve docking with the various types of circuit.

আরও জানতেঃ
Datasheet:
https://www.epitran.it/ebayDrive/datasheet/44.pdf

Vast Description:
https://www.mpja.com/download/31227sc.pdf

Explained Video with Arduino and Raspberry Pi:

আমরা সিলেটে অবস্থিত। কেনার জন্য ফোন করুন : ০১৭৬১ ৫০০০২০

Category:

Specification:
◦ Voltage: 5V – 20V
◦ Power Consumption: 65mA
◦ TTL output: 3.3V, 0V
◦ Delay time: Adjustable (.3->5min)
◦ Lock time: 0.2 sec
◦ Trigger methods: L – disable repeat trigger, H enable repeat trigger
◦ Sensing range: less than 120 degree, within 7 meters
◦ Temperature: – 15 ~ +70
◦ Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “HC-SR501 HCSR501 SR501 PIR Sensor”

There are no reviews yet.

No more offers for this product!

General Inquiries

There are no inquiries yet.

Announcement !! Due to COVID-19 pandemic & the current uncertainty with the transportation system, we may need to cancel your order. Thanks for understanding.