No products in the cart.
Arduino, Boards
Arduino Pro Mini
Availability:
2 in stock
Model: Arduino Pro Mini
Brand Name: WAVGAT
Features:
Microcontroller: ATmega168
Operating Voltage: 3.3V or 5V
Input Voltage: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 16 KB (of which 2 KB used by bootloader)
SRAM: 1 KB
EEPROM: 512 bytes
Clock Speed: 8 MHz (3.3V model) or 16 MHz (5V model)
৳ 200.00
2 in stock
রোবটিক্স এবং অন্য যেকোন প্রযেক্ট যেখানে অনেক ইনপুট প্রসেস করে আউটপুট কন্ট্রোল করতে হয় সেখানে আরডুইনো ব্যবহার করা অত্যন্ত সহজ এবং শ্রেয়।
আরও বিস্তারিত জানতেঃ
Documents to understand in details:
https://components101.com/microcontrollers/arduino-pro-mini
Explained Video:
আমরা সিলেটে অবস্থিত। কেনার জন্য ফোন করুন : ০১৭৬১ ৫০০০২০
Model: Arduino Pro Mini
Brand Name: WAVGAT
Features:
Microcontroller: ATmega168
Operating Voltage: 3.3V or 5V
Input Voltage: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 16 KB (of which 2 KB used by bootloader)
SRAM: 1 KB
EEPROM: 512 bytes
Clock Speed: 8 MHz (3.3V model) or 16 MHz (5V model)
Based on 0 reviews
Be the first to review “Arduino Pro Mini”
No more offers for this product!
General Inquiries
There are no inquiries yet.
Related products
- Arduino, Boards
Arduino Mega
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 14 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
Revision: 3SKU: n/a - Arduino, Boards
9AG GSM, GPRS, BDS Developement Board
Specifications
Size: 19.2mm x 18.8mm x 3mm
Working temperature: -30 ℃-80℃
Working voltage: 3.5v – 4.2v (it’s best to power by 4v)
Power voltage: >3.5v
Low power consumption:
Sensitivity:
GPIO level: 2.8vConnection
Connect usb-ttl with 4 wires when debugging, VUSB-5V; GND-GND; AT_TX-RX; AT_RX-TX
Or power supply by USB, then connect another three lines, GND-GND; AT_TX-RX; AT_RX-TX
Or power by lithium battery, VBAT-(3.3v-4.2) V; GND-GND; AT_TX-RX; AT_RX-TX; (VBAT power supply, need to press power_key button for about 2s)SKU: n/a - Arduino, Bluetooth, Boards, Wi-Fi
ESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Arduino, Bluetooth, Boards, Wi-FiESP32 rev1 Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Cor
Features of the ESP32 include the following:
For Course : https://github.com/Nabilphysics/ESP32_IoT_long_course_crux/wiki
Processors:
CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 DMIPS
Ultra low power (ULP) co-processor
Memory: 520 KiB SRAM
Wireless connectivity:
Wi-Fi: 802.11 b/g/n
Bluetooth: v4.2 BR/EDR and BLE
Peripheral interfaces:
12-bit SAR ADC up to 18 channels
2 × 8-bit DACs
10 × touch sensors (capacitive sensing GPIOs)
4 × SPI
2 × I²S interfaces
2 × I²C interfaces
3 × UART
SD/SDIO/CE-ATA/MMC/eMMC host controller
SDIO/SPI slave controller
Ethernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support
CAN bus 2.0
Infrared remote controller (TX/RX, up to 8 channels)
Motor PWM
LED PWM (up to 16 channels)
Hall effect sensor
Ultra low power analog pre-amplifier
Security:
IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: AES, SHA-2, RSA, elliptic curve cryptography (ECC), random number generator (RNG)
Power management:
Internal low-dropout regulator
Individual power domain for RTC
5uA deep sleep current
Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interruptSKU: n/a
There are no reviews yet.