No products in the cart.
ক্ল্যাপ সার্কিট সহ সাউন্ড ডিটেকশন কাজে লাগিয়ে তৈরি যেকোন সার্কিটে এই মডিউলটি ব্যবহার করা যাবে
Model: 3pin Voice Sound Detection Sensor Module
Brand Name: TZT
আরও বিস্তারিত জানতেঃ
Everything About this Module:
http://tinkbox.ph/sites/mytinkbox.com/files/downloads/SOUND_SENSOR_MODULE.pdf
Explained Video:
আমরা সিলেটে অবস্থিত। কেনার জন্য ফোন করুন : ০১৭৬১ ৫০০০২০
Features:
Operating voltage 3.3V-5V
Output model:digital switch outputs (0 and 1, highor low level)
With a mounting screw hole
PCB size: 3.4cm * 1.6cm
Based on 0 reviews
Be the first to review “3pin Voice Sound Detection Sensor Module”
No more offers for this product!
General Inquiries
There are no inquiries yet.
Related products
- Gas & Air, Sensors
MQ-7 Carbon Monoxide Gas Sensor Module
Model: MQ-7 Carbon Monoxide Gas Sensor Module
Brand Name: HAILANGNIAOFeatures:
Testing gas: Carbon Monoxide
Detection of concentration: 10-1000ppmCO
Loop voltage: 10V DC
Heater voltage: 5V±0.2V ACorDC(high), 1.5V±0.1V ACorDC(low)
Load resistance: adjustable
Heating resistor: 31±3(indoor temperature)
Heating dissipation: 350mW
Sensitive part surface resistance: 2K-20K
Sensitivity: Rs(in air)/Rs(100ppmCO)5
Concentration gradient: 0.6
Temperature, humidity: 20±2, 65%±5%RH
Standard test circuit: Vc: 5v ±0.1v, Vh(high): 5v ±0.1v, Vh(low): 1.5v ±0.1v
Condition: NewSKU: n/a - Sensors
MQ-3 Alcohol Ethanol Sensor Module
Specifications of MQ-3 Gas Sensor
Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off)
Current Consumption: 150mA
DO output: TTL digital 0 and 1 ( 0.1 and 5V)
AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detecting Concentration: 0.05-10mg/L Alcohol
Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
Heater consumption: less than 750mW
Operating temperature: 14 to 122 °F (-10 to 50°C)
Load resistance: 200kO
Sensitivity S: Rs(in air)/Rs(0.4mg/L Alcohol)=5
Sensing Resistance Rs: 2K?-20K?(in 0.4mg/l alcohol)
Dimensions: 32 x 22 x 16 mmSKU: n/a - Sensors, Pressure
Thin Film Pressure Sensor (Max 200 g)
Specifications:
Measuring Range: 0~200g
Thickness: <0.15mm
Response Point: <10g
Repeatability: <±2.7%(50% load)
Precision: ±2.5%
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
Operating Temperature: -20° ~ 60°
Sensing Area Outer Diameter: 5mm
Sensing Area Inner Diameter: 3.4mm
Pin Spacing: 1.0 mmNote:
1.Try to make load force evenly applied on sensor, avoid direct contact with sharp object.
2.Over-load use will deteriorate sensor performance or even cause damage.SKU: n/a
There are no reviews yet.