Sensors
Showing 1–24 of 38 results
- Sensors, Current
100A SCT-013-000 AC Current sensor
Model: 100A SCT-013-000 AC Current sensor
Brand Name: TZT
Specifications:
Opening size:13mmx13mm
Non-linearity 3%(10%-120% rated input current)
1.5m leading wire,Φ3.5 3 core plug standard output.
Two form of output current, voltage (voltage output built-in the sampling resistor).
Core material: ferrite
Mechanical strength: opening and closing times, no less than 1000 times (20 C
Safety indicators: Dielectric strength 6000V AC/1min
Operating Temperature: -25 C ~ +70 CApplications:
for AC motors, lighting equipment, air compressors
and other current measurement,monitoring and protection.SKU: n/a - Current, Sensors
20A SCT-013-020 Non-invasive AC current sensor
Model: 20A SCT-013-020 Non-invasive AC current sensor
Characteristics:
Openning size: 13mm*13mm,
Non-linerity±3%(10%—120% of rated input current)
1m leading wire, standard Φ3.5 three core plug output.Purpose:Used for current measurement,
monitor and protection for AC motor,
lighting equipment,
air compressor etcCore material: ferriteMechanical
strength: the number of switching is not less than 1000 times(test at 25°C)
Work temperature: -25°C~+70°CSKU: n/a - Sensors
20KG HX711 AD Module Load Cell Weight Sensor Electronic Scale Aluminum Alloy Wei
Model: 20KG HX711 AD Module Load Cell Weight Sensor Electronic Scale Aluminum Alloy Weighing Pressure Sensor
Brand Name: Your CeeFEATURES
• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85°C
• 16 pin SOP-16 packageSKU: n/a - Sensors
50KG Human Scale Body Load Cell Resistance Strain Weight Sensor + HX711 AD Modul
Model: 50KG Human Scale Body Load Cell Resistance Strain Weight Sensor + HX711 AD Module
Brand Name: MayitrFEATURES
• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85°C
• 16 pin SOP-16 packageSKU: n/a - Current, Sensors
ACS712 5A Current Sensor Module
Model: ACS712 5A Current Sensor Module
Brand Name: ARTOU
Features:
� Low-noise analog signal path
� Device bandwidth is set via the new FILTER pin
� 5 μs output rise time in response to step input current
� 50 kHz bandwidth
� Total output error 1.5% at TA = 25°C, and 4% at –40°C to 85°C
� Small footprint, low-profile SOIC8 package
� 1.2 mΩ internal conductor resistance
� 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
� 5.0 V, single supply operation
� 66 to 185 mV/A output sensitivity
� Output voltage proportional to AC or DC currents
� Factory-trimmed for accuracy
� Extremely stable output offset voltage
� Nearly zero magnetic hysteresis
� Ratiometric output from supply voltageSKU: n/a - Pressure, Sensors
DF9-40 Thin film Pressure Sensor (Max 20 kg)
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: ±2.5%(85% measuring range)
Repeatability: <±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mmSKU: n/a - Sensors, Humidity, Temperature
DHT11 Temperature and Humidity Sensor
যে প্রজেক্ট গুলোতে আমাদের তাপমাত্রা আর আর্দ্রতা দরকার পড়ে সেরকম যে কোন প্রজেক্টে আমরা অনেক সহজেই এই মডিউল টি ব্যবহার করতে পারি।
Name: Single Channela 5V relay module
Specification:
Working voltage:5V DC
Operating voltage:5V DCCompatible interfaces:2.54 3-pin interface and 4-pin Grove interface(1)
Related Video:
https://www.youtube.com/watch?v=7tUGUXyloXQআমরা সিলেটে অবস্থিত। কেনার জন্য ফোন করুন : ০১৭৬১ ৫০০০২০
SKU: n/a - Sensors
FPM10A Fingerprint Reader Module (3.3V/5V)
Item Description >>
Supply voltage: DC 3.6 ~ 6.0 V / 3.3 V
Supply current: < 120 mA
Peak current: < 140mA
Fingerprint image time: < 1.0 seconds
Window size: 14 ╳ 18 mm
Matching mode: Match mode (1 : 1)
Search mode: (1 : N)
Signature file: 256 bytes
Template files: 512 bytes
Storage capacity: max 200
Safety level: Five (from low to high: 1, 2, 3, 4, 5)
False accept rate (FAR): < 0.001% (security level 3)
False reject rate (FRR): < 1.0% (security level 3)
Search time: < 1.0 seconds (1:500, mean)
PC interface: UART (TTL logic level) or USB2.0 / USB1.1
Communication baud rate (UART): (9600 ╳ N) bps where N = 1 ~ 12 (default value N = 6, ie 57600bps)
Working environment:
Temperature: -20 ℃ – 50 ℃
Relative Humidity: 40% RH-85% RH (non-condensing)
Storage environment:
Temperature: -40 ℃ – 85 ℃
Relative humidity: < 85% H (non-condensing)
Dimensions (L ╳ W ╳ H):
Split: Fingerprint sensor: 56 ╳ 20 ╳ 21.5 mm
-One: 56 ╳ 20 ╳ 21.5SKU: n/a - Sensors
HC-SR501 HCSR501 SR501 PIR Sensor
Specification:
◦ Voltage: 5V – 20V
◦ Power Consumption: 65mA
◦ TTL output: 3.3V, 0V
◦ Delay time: Adjustable (.3->5min)
◦ Lock time: 0.2 sec
◦ Trigger methods: L – disable repeat trigger, H enable repeat trigger
◦ Sensing range: less than 120 degree, within 7 meters
◦ Temperature: – 15 ~ +70
◦ Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mmSKU: n/a - Pressure, Sensors
HX711 Weighing Sensor Dual-Channel 24 Bit Precision AD Module Pressure Sensor mo
Model: HX711 Weighing Sensor Dual-Channel 24 Bit Precision AD Module Pressure Sensor module
Brand Name: cuiiswFEATURES
• Two selectable differential input channels
• On-chip active low noise PGA with selectable gain of 32, 64 and 128
• On-chip power supply regulator for load-cell and ADC analog power supply
• On-chip oscillator requiring no external component with optional external crystal
• On-chip power-on-reset
• Simple digital control and serial interface: pin-driven controls, no programming needed
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60Hz supply rejection
• Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Operation supply voltage range: 2.6 ~ 5.5V
• Operation temperature range: -40 ~ +85°C
• 16 pin SOP-16 packageSKU: n/a - Light, Sensors
LDR 12mm GL12528
Model: LDR 12mm GL12528
Brand Name: diymoreFeatures:
1.Spectral Peak: 560nm
2.Maximum Voltage: 250 VDC
3.Maximum Wattage: 200 mW
4.Operating Temperature: -30 Celsuis ~ +70 Celsuis
5.Light Resistance (10 Lux): 10-20 Kohm
6.Dark Resistance: 2 Mohm
7.Resistance Illumination: 3
8.Response time: 20ms (Rise), 30ms (Down)
9.Coated with epoxy
10.Good reliability
11.Small volume
12.High sensitivity
13.Fast response
14.Good spectrum characteristicSKU: n/a - Sensors
Metal Detector Kit
Package include:
Metal detector module x 1
Resistance: 470R *1, 2K * 1, 200K *1
Adjustable Resistance: 100R * 1
Capacitance: 222P * 2, 104P *1
Electrolytic Capacitor: 100UF *1
Light Emitting DIodes: 5mm LED * 1
Transistor: 9012 * 2, 9018 * 1
Power switch: 6P Switch * 1
Buzzer: HSD9x12 * 1
Power terminal: KF301-2 * 1
Battery Compartment: AA1.5Vx3 * 1SKU: n/a - LED, Light
Motorcycle Helmet LED Light / Illumination Kit , Blink LED Kit
Specification:
Product type: Motorcycle helmet Signal Light Strip
Material: PVC
Thickness: 2 (mm)
Weight: 0.5g
Size: 380 * 35 (mm) (approximately)
Power supply: 3 V
Application: Compatible with any helmet.
Battery: 2 * AA batteries (not included)
Color: purple, blue, green, white, red, ice blue, powder white lightPacking list:
2 pcsx Flashing stripe bar
1 pc x 1 meter extension cord
1 pc x battery box
1 pc x one to two lines
1 pc x filmNote:
Due to the light and screen difference, the item color may differ slightly from the photos.
Please allow 1-2 cm differences due to manual measurement.SKU: n/a - Altitude, Pressure, Sensors, Temperature
MPL3115A2 Temperature, Pressure, Altitude sensor
Model: MPL3115A2 Temperature, Pressure, Altitude sensor
Brand Name: diymore
Features
•1.95V to 3.6V Supply Voltage, internally regulated by LDO
•1.6V to 3.6V Digital Interface Supply Voltage
•Fully Compensated internally
•Direct Reading, Compensated– Pressure: 20-bit measurement (Pascals)– Altitude: 20-bit measurement (meters)– Temperature: 12-bit measurement (degrees Celsius)
•Programmable Events
•Autonomous Data Acquisition
•Resolution down to 1 ft. / 30 cm
•32 Sample FIFO
•Ability to log data up to 12 days using the FIFO
•1 second to 9 hour data acquisition rate
•I2C digital output interface (operates up to 400 kHz)Application Examples
•High Accuracy Altimetry
•Smartphones/Tablets
•Personal Electronics Altimetry
•GPS Dead Reckoning
•GPS Enhancement for Emergency Services
•Map Assist, Navigation
•Weather Station EquipmentSKU: n/a - Sensors, Speed
MPXV7002DP Airspeed Sensor
Model:MPXV7002DP Airspeed Sensor
Brand Name: diymoreFeatures:
SensorModule : MPXV7002DP
Measurement Range: 2 to 2 kPa (-0.3 to 0.3 psi).
Resolution: 0.84Pa.
Data: Delivered at 14 bits from a 24 bit delta-sigma ADC.
Low pass filtered
Temperature compensated 10° to 60°C
0.5 to 4.5 V Output
Weight: 0.1 oz; 4 gSKU: n/a - Sensors, Gas & Air
MQ-135 Air Quality Sensor (NH3,NOx, alcohol, Benzene, smoke,CO2)
Model: MQ-135 Air Quality Sensor (NH3,NOx, alcohol, Benzene, smoke,CO2)
Brand Name :HAILANGNIAOFeatures:
High Sensitivity to: NH3,NOx, alcohol, Benzene, smoke,CO2
Operating voltage: DC 5V
Power (current) : 150mA
DO Output: 0.1V/5V
AO Output: 0.1-0.3V
Signal output indicator instructions
Dual signal output (analog output, and TTL level output)
TTL output valid signal is low; (output low signal light, which can be accessed microcontroller IO port)
Analog output with increasing concentration, the higher the concentration, the higher the voltage
Has a long life and reliable stability
Rapid response recovery characteristicsSKU: n/a