No products in the cart.
Development Boards
Showing all 6 results
- Development Boards
ACS714 5A 20A 30A 5v Isolate Current Sensor Breakout Board
Model: ACS714 5A 20A 30A 5v Isolate Current Sensor Breakout Board
Brand Name: diymore
Features:
� Low-noise analog signal path
� Device bandwidth is set via the FILTER pin
� 5 μs output rise time in response to step input current
� 80 kHz bandwidth
� Total output error 1.5% typical, at TA = 25°C
� Small footprint, low-profile SOIC8 package
� 1.2 mΩ internal conductor resistance
� 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
� 5.0 V, single supply operation
� 66 to 185 mV/A output sensitivity
� Output voltage proportional to AC or DC currents
� Factory-trimmed for accuracy
� Extremely stable output offset voltage
� Nearly zero magnetic hysteresis
� Ratiometric output from supply voltage
� Operating temperature range, –40°C to 150°CSKU: n/a - Development Boards, Arduino
AVR MCU ATmega8 Development Board
Model: AVR MCU ATmega8 Development Board
Brand Name: ReYeBu
All 23 IO pins leaded out.
Quartz crystall 16Mhz.
The DIP40 locking device, easy to remove the ATMEGA microcontroller for reuse.
Classic ATmega8 minimum system, eliminating the hassle of soldering
Crystal: The socket hole welding facilitate the buyer to replace the crystal, the default hair 8M crystal
Power supply: ISP port or external pins, three channels of power supply on the pins.
Reset: Power-on reset and reset button
External TX,RX, GND
On board ISP programmer connector.
External expansion 4 led lights, convenient debugging
Power LED (DS1)
Standard ISP download interface, board do not need extra power supply, use directly ISP power.SKU: n/a - Development Boards, Arduino
GY-68 BMP180 Digital Barometric Pressure Sensor Board
Model: GY-68 BMP180 Digital Barometric Pressure Sensor Board
Brand Name: diymore
Key features:
Pressure range:300 … 1100hPa (+9000m… -500m relating to sea level)
Supply voltage:1.8 … 3.6V (VDD)1.62V … 3.6V (VDDIO)
Low power:5μA at 1 sample / sec. in standard mode
Low noise:0.06hPa (0.5m) in ultra low power mode0.02hPa (0.17m) advancedresolution mode-
Temperature measurement included-
I2C interface-
Fully calibrated-
Pb-free, halogen-free and RoHS compliant,SKU: n/a - Development Boards
Lilypad and CH340G Programmer
Model: Lilypad & CH340G Programmer
Features(Lylipad):
Brand Name: Open Smart
1. Can be directly programmed with the CH340G USB to TTL adapter module.
2. Supports ISP download.
3. Microcontroller: Atmel ATmega328P.
4. Operating Voltage: 4.5 – 5.5V.
5. Digital I/O Pins: 14 (of which 6 provide PWM output).
6. Analog Input Pins: 8.
7. Flash Memory: 32 KB of which 2 KB used by bootloader.
8. SRAM: 2 KB.
9. EEPROM: 1 KB.
10. Clock Speed: 16 MHz.Features(CH340G):
Brand Name: SAMIORE ROBOTSKU: n/a - Development Boards, Arduino
Multifunctional Expansion Board for Arduino
Model: Multifunctional Expansion Board for Arduino
Brand Name: TZT teng
Condition: New
4 digit 7-segment LED display module driven by two serial 74HC595’s
4 LED’s
10K potentiometer
3 x push buttons
Piezo buzzer
DS18B20 temperature sensor interface (not included)
Infrared receiver interface
Serial interface header for connection to serial modulesSKU: n/a
